Temperature, Humidity and Pressure Sensor Board

The solar radiation shield should be cleaned with a hot wet cloth to remove any dust or dirt build up and the Temperature, Humidity and Pressure Sensor Board should be checked for correct operation.

Checking the Temperature, Humidity and Pressure Sensor Board

• Connect the Weather-Pro weather station to a computer
• Download the current data and graph temperature humidity and pressure for the last 24 hours
• Look for any inconsistencies in the data such as unexplained jumps or readings that are locked to one value
• If the station is located within 20km and is at the same altitude as an airport, metrological data from the airport could be used to verify the correct operation of the barometric pressure sensor

If any problems are found while checking the Temperature, Humidity and Pressure Sensor Board, the board should be replaced. a temperature, Humidity and Pressure Sensor Board maintainance kit with all parts required and full instructions is available from your Weather-Pro agent.