wpro1.gif

Weather-Pro Features
Qs_rbbr.gif (1969 bytes)

The Weather-Pro is a self contained, logging weather station. It is easy to both install and maintain. It is used for the observation and logging of meteorological data including: 

A solar radiation shield, mounted under the station crossbar, houses the logger electronics, temperature, humidity and pressure sensors. The wind vane, anemometer and light energy sensor are mounted along the top of the crossbar. Two auxiliary sockets, located under the crossbar, are used to connect an optional tipping bucket rain gauge and an auxiliary sensor such as leaf wetness or ground temperature.  

The station has been designed to ensure operation over a wide range of climatic conditions. The Instruments are manufactured from Stainless Steel and  Anodized Aluminum. Where ever possible, plastics have not been used because of their long term susceptibility to Ultra-Violet radiation and low temperatures. 

The Weather-Pro station is configured and logging is started with a standard PC or laptop using the Weather-Pro Application Software. Once started, the station can be disconnected from the computer. The computer can be reconnected at any time to observe the realtime data and trends or to download the historic data logged by the weather station. Once downloaded the data can be be listed, graphed, exported and analyzed from statistical and periodic reports. 

The Weather-Pro weather station includes a sophisticated alarm system that warns the user when alarm conditions occur. These alarm conditions are user configurable and each of the six conditions can be used individually or in combination to trigger any combination of the two alarm outputs including: